Updated · Built and checked by the PlinzoTools team, formulas tested against published sources
Convert Feet to Meters instantly with an exact, accurate formula -- no sign-up, no ads blocking the result.
Converting Feet to Meters means multiplying by an exact, fixed constant (0.3048) rather than an approximation -- the same factor this calculator uses internally. Length is one of the most commonly converted measurement types, since the US customary system (inches, feet, yards, miles) and the metric system (centimeters, meters, kilometers) are both in everyday use worldwide, and construction, travel, shipping, and international specs constantly require translating between them. The meter is the SI base unit of length, equal to about 3.28084 feet. One foot equals exactly 12 inches, or 0.3048 meters.
Enter your value and confirm the "From Unit" dropdown is set to Feet -- the result grid updates instantly, showing your value converted into every unit in this length category at once (not just Meters), so you can see multiple equivalent measurements without switching tools. There's no button to press and nothing is sent to a server, so it works the same on a phone with no signal as it does on a desktop.
Meters = Feet × 0.3048
Modern length units are defined against the meter, the SI base unit for length -- the inch is fixed at exactly 0.0254 meters by international agreement (the 1959 international yard and pound agreement), which is why length conversions between US customary and metric units are exact, not approximated.
| Feet | Meters |
|---|---|
| 1 | 0.3048 |
| 5 | 1.524 |
| 10 | 3.048 |
| 50 | 15.24 |
| 100 | 30.48 |
Construction and DIY projects that mix US customary measurements (a tape measure) with metric specs (imported materials or international plans). Students and travelers converting distances between the US customary and metric systems. Shipping and manufacturing specs that require an exact unit match. For related conversions, see Inches to Fraction Calculator and Square Footage Calculator.
This calculator carries full precision internally and only rounds the final displayed result for readability -- if you need more or fewer decimal places than shown, the underlying value is still exact to the limits of floating-point arithmetic.
Multiply the Feet value by 0.3048 to get Meters. This calculator does that automatically as you type, so you don't need to do the multiplication by hand.
Yes -- 1 Feet equals 0.3048 Meters by definition, so the result is mathematically exact rather than a rounded estimate (the displayed value may be rounded for readability, but the underlying calculation isn't).
Yes -- change the "From Unit" dropdown above the input to switch direction. The same conversion engine handles every unit in this category, not just Feet and Meters.
Exact -- the relationship between Feet and Meters is a fixed international definition, not a measured approximation, so the underlying calculation carries full precision regardless of how the displayed result is rounded.
Meters is one of the standard units for measuring length -- see the Practical Uses section above for the specific contexts where it's most commonly encountered.
100 feet equals 30.48 meters, using the same 0.3048 factor as the rest of this page.
Multiplying a feet value by 0.3048 gives you meters. The reverse conversion divides by 0.3048, which is the same as multiplying by 3.28084. For example, 12.5 feet × 0.3048 = 3.81 meters, and 60 feet × 0.3048 = 18.288 meters.
One foot equals exactly 12 inches, or 0.3048 meters. The meter is the SI base unit of length, equal to about 3.28084 feet.
| Feet | Meters |
|---|---|
| 1 | 0.3048 |
| 2 | 0.6096 |
| 3 | 0.9144 |
| 5 | 1.524 |
| 10 | 3.048 |
| 15 | 4.572 |
| 20 | 6.096 |
| 25 | 7.62 |
| 50 | 15.24 |
| 75 | 22.86 |
| 100 | 30.48 |
| 250 | 76.2 |
| 500 | 152.4 |
| 1,000 | 304.8 |
How many meters are in 1 feet?
1 feet equals 0.3048 meters.
How many feet are in 1 meters?
1 meters equals 3.28084 feet.
What is 25 feet in meters?
25 feet equals 7.62 meters, using the same 0.3048 factor as the rest of this chart.
Is this conversion exact or approximate?
The 0.3048 factor comes from a fixed, exact definitional constant, so the underlying math is exact; the numbers on this page are rounded to seven significant digits for readability, and the calculator above keeps the full-precision value.
Values are rounded to seven significant digits for display; the converter above uses the full-precision factor.
Reference: NIST Weights and Measures